R3303-HP HSR6800 Routers MPLS Command Reference

374
Default command level
2: System level
Parameters
ip-address: Specifies the IP address of a peer.
prefix-name: Specifies the name of an IPv6 prefix list, a string of 1 to 19 characters.
export: Filters routes to be advertised to the peer.
import: Filters routes received from the peer.
Examples
# In BGP-VPNv6 subaddress family view, apply IPv6 prefix list list1 to filter routes received from peer
1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] peer 1.1.1.1 ipv6-prefix list1 import
peer preferred-value (BGP-VPNv6 subaddress family view)
Use peer preferred-value to specify the preference value for the routes received from the specified
peer/peer group.
Use undo peer preferred-value to restore the default.
Syntax
peer ip-address preferred-value value
undo peer ip-address preferred-value
Default
The preference value for the routes received from a peer/peer group is 0.
Views
BGP-VPNv6 subaddress family view
Default command level
2: System level
Parameters
group-name: Specifies the name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.
value: Specifies the preference value to be specified, in the range of 0 to 65535.
Examples
# In BGP-VPNv6 subaddress family view, set the preference value for the routes received from peer
131.10 8 .1.1 t o 5 0 .
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] peer 131.108.1.1 preferred-value 50