R3303-HP HSR6800 Routers MPLS Command Reference

Parameters

lsp-name lsp-name: Displays information about the specified LSP. The LSP name is a string of 1 to 15

characters.

exclude: Displays information about the LSPs other than the one for the given FEC.

include: Displays information about the LSP for the given FEC.

dest-addr mask-length: Specifies a FEC by a destination address and mask length. The value range for

the mask length is 0 to 32.

verbose: Displays detailed information.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

• begin: Displays the first line that matches the specified regular expression and all lines that follow.

• exclude: Displays all lines that do not match the specified regular expression.

• include: Displays all lines that match the specified regular expression.

• regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display brief information about all static LSPs.

<Sysname> display mpls static-lsp

total statics-lsp : 1

Name FEC I/O Label I/O If State

lsp1 3.3.3.9/32 NULL/100 -/GE2/1/1 Up

# Display detailed information about all static LSPs.

<Sysname> display mpls static-lsp verbose

No : 1

LSP-Name : lsp1

LSR-Type : Ingress

FEC : 3.3.3.9/32

In-Label : NULL

Out-Label : 100

In-Interface : -

Out-Interface : GigabitEthernet2/1/1

NextHop : 30.1.1.2

Static-Lsp Type: IPTN

Lsp Status : Up

Table 22 Command output

Field Descri

tion

LSR-Type Role of the LSR for the LSP: Ingress, Egress, or Transit.

Static-Lsp Type Type of the static LSP.

Related commands

• display mpls lsp

• display mpls statistics lsp