R3303-HP HSR6800 Routers MPLS Command Reference

61
Keyword HSR6802/HSR6804/HSR6808
in-label 0 to 97279
tunnel token token: Specifies a public network tunnel by its LSP token. The value range for the token is 0
to 4294967295.
Examples
# Enable statistics for the LSP with the incoming label of 1024.
<Sysname> system-view
[Sysname] mpls statistics enable lsp in-label 1024
Related commands
• display mpls statistics interface
• display mpls statistics lsp in-label
• display mpls statistics tunnel
non-stop-routing
Use non-stop-routing to enable the LDP NSR function.
Use undo non-stop-routing to disable the LDP NSR function.
Syntax
non-stop-routing
undo non-stop-routing
Default
The LDP NSR function is disabled.
Views
MPLS LDP view
Default command level
2: System level
Usage guidelines
The graceful-restart command and the non-stop-routing command are mutually exclusive. Do not
configure both commands on the device.
Examples
# Enable the LDP NSR function.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] quit
[Sysname] mpls ldp
[Sysname-mpls-ldp] non-stop-routing