R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

Figure 1 Network diagram

Configuration procedure

# Use the ping command on Device A to test connectivity to Device C.

<DeviceA> ping 1.1.2.2

PING 1.1.2.2: 56 data bytes, press CTRL_C to break

Reply from 1.1.2.2: bytes=56 Sequence=1 ttl=254 time=205 ms

Reply from 1.1.2.2: bytes=56 Sequence=2 ttl=254 time=1 ms

Reply from 1.1.2.2: bytes=56 Sequence=3 ttl=254 time=1 ms

Reply from 1.1.2.2: bytes=56 Sequence=4 ttl=254 time=1 ms

Reply from 1.1.2.2: bytes=56 Sequence=5 ttl=254 time=1 ms

--- 1.1.2.2 ping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 1/41/205 ms

# Get detailed information about routes from Device A to Device C.

<DeviceA> ping -r 1.1.2.2

PING 1.1.2.2: 56 data bytes, press CTRL_C to break

Reply from 1.1.2.2: bytes=56 Sequence=1 ttl=254 time=53 ms

Record Route:

1.1.2.1

1.1.2.2

1.1.1.2

1.1.1.1

Reply from 1.1.2.2: bytes=56 Sequence=2 ttl=254 time=1 ms

Record Route:

1.1.2.1

1.1.2.2

1.1.1.2

1.1.1.1

Reply from 1.1.2.2: bytes=56 Sequence=3 ttl=254 time=1 ms

Record Route:

1.1.2.1

1.1.2.2

1.1.1.2