R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

150
The version 9 format template-based feature provides support of different statistics, such as BGP next hop
and MPLS information.
IPv6 NetStream configuration task list
Before you configure IPv6 NetStream, verify that the following configurations are proper, as needed:
• Make sure which device you want to enable IPv6 NetStream on.
• Configure the timer for IPv6 NetStream flow aging.
• To reduce the bandwidth that IPv6 NetStream data export uses, configure IPv6 NetStream
aggregation.
Complete these tasks to configure IPv6 NetStream:
Task Remarks
Enabling IPv6 NetStream Required.
Configuring IPv6 NetStream data
export
Configuring IPv6 NetStream
tra
ditional data export
Use at least one method.
Configuring IPv6 NetStream
aggregation data export
Configuring attributes of IPv6 NetStream data export Optional.
Configuring IPv6 NetStream flow aging Optional.
Enabling IPv6 NetStream
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Enable IPv6 NetStream
on the interface.
ipv6 netstream { inbound | outbound } Disabled by default.
Configuring IPv6 NetStream data export
To allow the NDE to export collected statistics to the NetStream server, configure the source interface out
of which the data is sent and the destination address to which the data is sent.
Configuring IPv6 NetStream traditional data export
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface interface-type
interface-number
N/A