R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide
164
Task Remarks
Configuring the minimum age of syslog messages Optional.
Disabling an interface from generating link up/down logging information Optional.
Configurations for the information output destinations function independently.
Outputting system information to the console
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable the information center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See Table 7 for
default channel
names.
4. Configure an output channel
for the console.
info-center console channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (console).
5. Configure an output rule for
the console.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "Default output rules of system
informati
on."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the timestamp format
for log, trap and debugging
information is date.
7. Return to user view.
quit
N/A
8. Enable system information
output to the console.
terminal monitor
Optional.
The default setting is enabled.
9. Enable the display of system
information on the console.
• Enable the display of
debugging information on the
console:
terminal debugging
• Enable the display of log
information on the console:
terminal logging
• Enable the display of trap
information on the console:
terminal trapping
Optional.
By default, the console displays log
and trap information, and discards
debug information.