R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

171
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet
interface view, Layer 3
Ethernet interface view, or
VLAN interface view.
interface interface-type
interface-number
N/A
3. Disable the interface from
generating link up or link
down logging information.
undo enable log updown
By default, all interfaces generate
link up and link down logging
information when the state
changes.
Configuring the minimum age of syslog messages
The minimum age specifies how long a syslog message must be kept before it can be overwritten by new
messages. The default setting is 0.
To specify the minimum age of syslog messages:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the minimum age
of syslog messages.
info-center syslog min-age hours The default minimum age is 0.
Displaying and maintaining information center
Task Command Remarks
Display information about
information channels.
display channel [ channel-number |
channel-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information center
configuration information.
display info-center [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display the state and the log
information of the log buffer .
display logbuffer [ reverse ] [ level
severity | size buffersize | slot
slot-number ] * [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the summary of the log
buffer.
display logbuffer summary [ level
severity | slot slot-number ] * [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display the content of the log file
buffer.
display logfile buffer [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the configuration of the log
file.
display logfile summary [ | { begin |
exclude | include } regular-expression ]
Available in any view.