R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

10
Figure 6 Collaboration
The following describes how a static route destined for 192.168.0.88 is monitored through collaboration:
1. NQA monitors the reachability to 192.168.0.88.
2. When 192.168.0.88 becomes unreachable, NQA notifies the Track module of the change.
3. The Track module notifies the static routing module of the state change.
4. The static routing module sets the static route as invalid according to a predefined action.
For more information about collaboration, see High Availability Configuration Guide.
Threshold monitoring
Threshold monitoring enables the NQA client to display results or send trap messages to the network
management station (NMS) when the performance metrics that an NQA operation gathers violate the
specified thresholds.
Table 1 de
scribes the relationships between performance metrics and NQA operation types.
Table 1 Performance metrics
Performance metric NQA o
p
eration t
yp
es that can
g
ather the metric
Probe duration All NQA operation types excluding UDP jitter and voice
Number of probe failures All NQA operation types excluding UDP jitter and voice
Round-trip time UDP jitter and voice
Number of discarded packets UDP jitter and voice
One-way jitter (source-to-destination and
destination-to-source)
UDP jitter and voice
One-way latency (source-to-destination and
destination-to-source)
UDP jitter and voice
Calculated Planning Impairment Factor (ICPIF)
(see "Configuring a voice operation")
Voice
Mean Opinion Scores (MOS) (see
" Configuring a voice operation")
Voic
e
Application modules
Detection
module
Sends the
detection results
Sends the track
entry status
Track
Associates with an
NQA entry
Associates with a
track entry
VRRP
Static routing
Policy-based
routing
Interface backup
NQA
Traffic redirection