R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

177
Field Descri
p
tion
StartTime Start time of the flow, in seconds, counted from 1970/01/01 00:00.
EndTime End time of the flow, in seconds, counted from 1970/01/01 00:00.
InTotalPkg Number of packets received.
InTotalByte Number of bytes received.
OutTotalPkg Number of packets sent.
OutTotalByte Number of bytes sent.
Reserved1
Reserved in version 0x02 (FirewallV200R001).
In version 0x03 (FirewallV200R005), the first byte is the source VPN ID, the second byte
is the destination VPN ID, and the third and forth bytes are reserved for future
applications.
Reserved2 For future applications.
Reserved3 For future applications.
Flow logging configuration task list
Task Remarks
Configuring the flow logging version Optional.
Configuring the source address for flow log packets Optional.
Exporting flow logs
Exporting flow logs to a log server
Required.
Use either method.
Exporting flow logs to the information
center
Configuring the flow logging version
Configure the flow logging version that the log receiver supports. The receiver cannot resolve flow logs
if it does not support the specified flow logging version.
To configure the flow logging version:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the flow logging
version.
userlog flow export version
version-number
Optional.
The default version is 1.0.
If you configure the flow logging
version multiple times, only the
most recent configuration takes
effect.