R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

192
Ste
p
Command
2. Delete a legitimate
flow entry.
• In standalone mode:
host-monitor delete source source-ip destination destination-ip protocol
protocol interface interface-type interface-number { inbound | outbound }
[ vpn-instance vpn-instance-name ] [ slot slot-number ]
• In IRF mode:
host-monitor delete source source-ip destination destination-ip protocol
protocol interface interface-type interface-number } { inbound | outbound }
[ vpn-instance vpn-instance-name ] [ chassis chassis-number slot slot-number ]
Deleting unfixed flow entries
To delete the unfixed flow entries on one or all cards, perform the following task in user view:
Task Command
Delete unfixed flow
entries.
• In standalone mode:
reset host-monitor entry [ slot slot-number [ source-slot source-slot-number ] ]
• In IRF mode:
reset host-monitor entry [ chassis chassis-number slot slot-number [ source-slot
source-slot-number ] ]
Deleting illegitimate flow entries
To delete the illegitimate flow entries on one or all cards, perform the following task in user view:
Task Command
Delete illegitimate flow
entries.
• In standalone mode:
reset host-monitor entry invalid [ slot slot-number [ source-slot
source-slot-number ] ]
• In IRF mode:
reset host-monitor entry invalid [ chassis chassis-number slot slot-number
[ source-slot source-slot-number ] ]
Displaying and maintaining Host-monitor
Task Command Remarks
Display the flow entries in the host
monitor table (in standalone
mode).
display host-monitor [ invalid ]
[ verbose ] [ destination ip-address |
interface interface-type interface-number
| source ip-address ] * [ slot slot-number ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.