R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

[RouterA-nqa-admin-test1-ftp] filename config.txt

# Enable the saving of history records.

[RouterA-nqa-admin-test1-ftp] history-record enable

[RouterA-nqa-admin-test1-ftp] quit

# Start the FTP operation.

[RouterA] nqa schedule admin test1 start-time now lifetime forever

# Stop the FTP operation after a period of time.

[RouterA] undo nqa schedule admin test1

# Display the results of the FTP operation.

[RouterA] display nqa result admin test1

NQA entry (admin admin, tag test1) test results:

Destination IP address: 10.2.2.2

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 173/173/173

Square-Sum of round trip time: 29929

Last succeeded probe time: 2011-11-22 10:07:28.6

Extended results:

Packet loss in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history records of the FTP operation.

[RouterA] display nqa history admin test1

NQA entry (admin admin, tag test1) history record(s):

Index Response Status Time

1 173 Succeeded 2011-11-22 10:07:28.6

The output shows that Router A uses 173 milliseconds to upload a file to the FTP server.

HTTP operation configuration example

Network requirements

As shown in Figure 11, configure an HTTP operation on the NQA client to test the time required to obtain

data from the HTTP server.

Figure 11 Network diagram