5.5 HP StorageWorks X9300 Network Storage Gateway Administrator Guide (AW539-96007, March 2011)
Table Of Contents
- X9300 Network Storage Gateway Administrator Guide
- Contents
- 1 Product description
- 2 Getting started
- 3 Configuring virtual interfaces for client access
- 4 Configuring failover
- 5 Configuring cluster event notification
- 6 Configuring system backups
- 7 Creating hostgroups for X9000 clients
- 8 Monitoring cluster operations
- 9 Maintaining the system
- Shutting down the system
- Starting the system
- Powering file serving nodes on or off
- Starting and stopping processes
- Tuning file serving nodes and X9000 clients
- Migrating segments
- Removing storage from the cluster
- Maintaining networks
- Viewing network interface information
- 10 Migrating to an agile managment console configuration
- 11 Upgrading the X9000 Software
- 12 Licensing
- 13 Upgrading firmware
- 14 Troubleshooting
- 15 Replacing components
- 16 Recovering a file serving node
- 17 Support and other resources
- A Component and cabling diagrams
- B Spare parts list
- C Warnings and precautions
- D Regulatory compliance and safety
- Glossary
- Index
8. Enable standby pairing and monitoring on the new HBA if desired, using the GUI or CLI:
• On the GUI, select Servers from the Navigator pane, and then select the appropriate server
from the Servers pane. Select HBAs in the left pane, select the appropriate Node WWN, and
click Modify. On the Modify HBA Properties window, select Enable monitoring and Enable
backup pair, and select the WWPN for the backup HBA.
• On the CLI, execute the following command to enable standby pairing:
ibrix_hba -b -P WWPN1:WWPN2 -h <server_name>
Execute the following command on both ports to enable monitoring:
ibrix_hba -m -h <server_name> -p WWPN
9. Fail back the server using the GUI or CLI:
• On the GUI, select Servers from the Navigator pane, and then select the appropriate server
from the Servers pane. Next, select the server name in the left pane, and click Failback.
• On the CLI, execute the following command:
ibrix_server -f –U –h <server_name>
X9300 Network Storage Gateway Administrator Guide 105