5.5 HP StorageWorks X9300 Network Storage Gateway Administrator Guide (AW539-96007, March 2011)
Table Of Contents
- X9300 Network Storage Gateway Administrator Guide
- Contents
- 1 Product description
- 2 Getting started
- 3 Configuring virtual interfaces for client access
- 4 Configuring failover
- 5 Configuring cluster event notification
- 6 Configuring system backups
- 7 Creating hostgroups for X9000 clients
- 8 Monitoring cluster operations
- 9 Maintaining the system
- Shutting down the system
- Starting the system
- Powering file serving nodes on or off
- Starting and stopping processes
- Tuning file serving nodes and X9000 clients
- Migrating segments
- Removing storage from the cluster
- Maintaining networks
- Viewing network interface information
- 10 Migrating to an agile managment console configuration
- 11 Upgrading the X9000 Software
- 12 Licensing
- 13 Upgrading firmware
- 14 Troubleshooting
- 15 Replacing components
- 16 Recovering a file serving node
- 17 Support and other resources
- A Component and cabling diagrams
- B Spare parts list
- C Warnings and precautions
- D Regulatory compliance and safety
- Glossary
- Index
6. When the following screen appears, enter qr to recover the file serving node.
The server reboots automatically after the software is installed. Remove the DVD from the DVD-ROM
drive.
7. When your cluster was configured initially, the installer may have created a template for
configuring file serving nodes. To use this template to configure the file serving node undergoing
recovery, go to “Configuring a file serving node using the original template” on page 108.
To configure the file serving node manually, without the template, go to “Configuring a file serving
node manually” on page 112.
To configure a Management Server that hosts the agile management console, go to “Configuring
a file serving node manually” on page 112.
Configuring a file serving node using the original template
Complete the following steps:
1. Log into the system as user root (the default password is hpinvent).
2. When the System Deployment Menu appears, select Join an existing cluster.
Recovering a file serving node108