5.5 HP StorageWorks X9300 Network Storage Gateway Administrator Guide (AW539-96007, March 2011)
Table Of Contents
- X9300 Network Storage Gateway Administrator Guide
- Contents
- 1 Product description
- 2 Getting started
- 3 Configuring virtual interfaces for client access
- 4 Configuring failover
- 5 Configuring cluster event notification
- 6 Configuring system backups
- 7 Creating hostgroups for X9000 clients
- 8 Monitoring cluster operations
- 9 Maintaining the system
- Shutting down the system
- Starting the system
- Powering file serving nodes on or off
- Starting and stopping processes
- Tuning file serving nodes and X9000 clients
- Migrating segments
- Removing storage from the cluster
- Maintaining networks
- Viewing network interface information
- 10 Migrating to an agile managment console configuration
- 11 Upgrading the X9000 Software
- 12 Licensing
- 13 Upgrading firmware
- 14 Troubleshooting
- 15 Replacing components
- 16 Recovering a file serving node
- 17 Support and other resources
- A Component and cabling diagrams
- B Spare parts list
- C Warnings and precautions
- D Regulatory compliance and safety
- Glossary
- Index
15. When you have completed your entries on the file serving node Configuration Menu, select
Continue.
16. Verify your entries on the confirmation screen, and select Commit to apply the values to the file
serving node and register it with the management console.
17. If the hostname specified for the node already exists in the cluster (the name was used by the
node you are replacing), the Replace Existing Server window asks whether you want to replace
the existing server with the node you are configuring. When you click Yes, the replacement node
will be registered.
18. After the server is registered, you will be asked whether you want to configure a passive agile
management console on the node.
IMPORTANT:
Configure a passive agile management console only if the following conditions are met:
• The agile management console is enabled and an active agile management console is con-
figured.
• The passive agile management console is not configured on any other nodes in the cluster.
If you configured a user network, enter a VIF IP address and netmask for the network.
X9300 Network Storage Gateway Administrator Guide 121