5.5 HP StorageWorks X9300 Network Storage Gateway Administrator Guide (AW539-96007, March 2011)

Table Of Contents
Using the Windows X9000 client GUI
The Windows X9000 client GUI is the client interface to the management console. To open the GUI,
double-click the desktop icon or select the IBRIX Client program from the Start menu on the client. The
client program contains tabs organized by function.
NOTE:
The Windows X9000 client application can be started only by users with Administrative privileges.
Status. Shows the clients management console registration status and mounted file systems, and
provides access to the IAD log for troubleshooting.
Registration. Registers the client with the management console, as described in the HP StorageWorks
File Serving Software Installation Guide.
Mount. Mounts a file system. Select the Cluster Name from the list (the cluster name is the manage-
ment console name), enter the name of the file system to mount, select a drive, and then click
Mount. (If you are using Remote Desktop to access the client and the drive letter does not appear,
log out and log back in.)
Umount. Unmounts a file system.
Tune Host. Tunable parameters include the NIC to prefer (the client uses the cluster interface by
default unless a different network interface is preferred for it), the communications protocol (UDP
or TCP), and the number of server threads to use.
Active Directory Settings. Displays current Active Directory settings.
Online help is also available for the client GUI.
X9000 Software manpages
X9000 Software provides manpages for most of its commands. To view the manpages, set the
MANPATH variable on the management console to include the path to the manpages and then export
it. The manpages are in the $IBRIXHOME/man directory. For example, if $IBRIXHOME is /usr/
local/ibrix (the default), you would set the MANPATH variable as follows on the management
console and then export the variable.
MANPATH=$MANPATH:/usr/local/ibrix/man
Changing passwords
You may want to change the passwords on your system:
Hardware passwords. See the documentation for the specific hardware for more information.
Root password. Use the passwd(8) command on each server in turn.
X9000 Software user password. This password is created during installation and is used to log
on to the management console GUI. The default is ibrix. You can change the password on the
management console using the Linux passwd command. You will be prompted to enter the new
password.
# passwd ibrix
X9300 Network Storage Gateway Administrator Guide 19