6.3 HP StoreAll 9300/9320 Storage Administrator Guide (AW549-96072, June 2013)

when you prefer a network interface, you can force clients to query the Fusion Manager by executing
the command ibrix_lwhost --a on the client or by rebooting the client.
Preferring a network interface for a file serving node or Linux StoreAll client
The first command prefers a network interface for a File Server Node; the second command prefers
a network interface for a client.
ibrix_server -n -h SRCHOST -A DESTHOST/IFNAME
ibrix_client -n -h SRCHOST -A DESTHOST/IFNAME
Execute this command once for each destination host that the file serving node or StoreAll client
should contact using the specified network interface (IFNAME). For example, to prefer network
interface eth3 for traffic from file serving node s1.hp.com to file serving node s2.hp.com:
ibrix_server -n -h s1.hp.com -A s2.hp.com/eth3
Preferring a network interface for a Windows StoreAll client
If multiple user network interfaces are configured on the cluster, you will need to select the preferred
interface for this client. On the Windows StoreAll client GUI, specify the interface on the Tune Host
tab, as in the following example.
Preferring a network interface for a host group
You can prefer an interface for multiple StoreAll clients at one time by specifying a host group. To
prefer a user network interface for all StoreAll clients, specify the clients host group. After
preferring a network interface for a host group, you can locally override the preference on individual
StoreAll clients with the command ibrix_lwhost.
To prefer a network interface for a host group, use the following command:
Maintaining networks 123