6.3 HP StoreAll 9300/9320 Storage Administrator Guide (AW549-96072, June 2013)

ibrix 2323332 0 (unused)
lsmod|grep ipfs
ipfs1 102592 0 (unused)
If either grep command returns empty, contact HP Support.
6. From the management console, verify that the new version of StoreAll software FS/IAS has
been installed on the file serving nodes:
<ibrixhome>/bin/ibrix_version -l -S
Completing the upgrade
1. Remount all file systems:
<ibrixhome>/bin/ibrix_mount -f <fsname> -m </mountpoint>
2. From the management console, turn automated failover back on:
<ibrixhome>/bin/ibrix_server -m
3. Confirm that automated failover is enabled:
<ibrixhome>/bin/ibrix_server -l
In the output, HA displays on.
4. From the management console, perform a manual backup of the upgraded configuration:
<ibrixhome>/bin/ibrix_fm -B
5. Verify that all version indicators match for file serving nodes. Run the following command from
the management console:
<ibrixhome>/bin/ibrix_version -l
If there is a version mismatch, run the /ibrix/ibrixupgrade -f script again on the
affected node, and then recheck the versions. The installation is successful when all version
indicators match. If you followed all instructions and the version indicators do not match,
contact HP Support.
6. Verify the health of the cluster:
<ibrixhome>/bin/ibrix_health -l
The output should show Passed / on.
Agile upgrade for clusters with an agile management console configuration
Use these procedures if your cluster has an agile management console configuration. The StoreAll
software 5.4.x to 5.5 upgrade can be performed either online or offline. Future releases may
require offline upgrades.
NOTE: Be sure to read all instructions before starting the upgrade procedure.
Agile online upgrade
Perform the agile online upgrade in the following order:
File serving node hosting the active management console
File serving node hosting the passive management console
Remaining file serving nodes and StoreAll clients
Upgrading the file serving nodes hosting the management console
Complete the following steps:
172 Cascading Upgrades