6.3 HP StoreAll 9300/9320 Storage Administrator Guide (AW549-96072, June 2013)

• Cluster configuration (ibrix_clusterconfig)
• Configuration database consistency (ibrix_dbck)
• Shell task management (ibrix_shell)
The following operations can be performed only from the StoreAll Management Console:
• Scheduling recurring data validation scans
• Scheduling recurring software snapshots
• Scheduling recurring block snapshots
Using the StoreAll Management Console
The StoreAll Management Console is a browser-based interface to the Fusion Manager. See the
release notes for the supported browsers and other software required to view charts on the
dashboard. You can open multiple Management Console windows as necessary.
If you are using HTTP to access the Management Console, open a web browser and navigate to
the following location, specifying port 80:
http://<management_console_IP>:80/fusion
If you are using HTTPS to access the Management Console, navigate to the following location,
specifying port 443:
https://<management_console_IP>:443/fusion
In these URLs, <management_console_IP> is the IP address of the Fusion Manager user VIF.
The Management Console prompts for your user name and password. The default administrative
user is ibrix. Enter the password that was assigned to this user when the system was installed.
(You can change the password using the Linux passwd command.) To allow other users to access
the Management Console, see “Adding user accounts for Management Console access” (page 31).
Upon login, the Management Console dashboard opens, allowing you to monitor the entire cluster.
(See the online help for information about all Management Console displays and operations.)
There are three parts to the dashboard: System Status, Cluster Overview, and the Navigator.
28 Getting started