6.3 HP StoreAll 9300/9320 Storage Administrator Guide (AW549-96072, June 2013)

Enter the following custom field settings in HP SIM:
• Custom field settings for 9300/9320
Servers are discovered with their IP addresses. When a server is discovered, edit the system
properties on the HP Systems Insight Manager. Locate the Entitlement Information section of
the Contract and Warranty Information page and update the following:
◦ Enter the StoreAll enclosure product number as the Customer-Entered product number
◦ Enter X9000 as the Custom Delivery ID
◦ Select the System Country Code
◦ Enter the appropriate Customer Contact and Site Information details
• Custom field settings for MSA Storage Management Utility
Configure SNMP settings on the MSA Storage Management Utility. (For more information,
see “Configuring SNMP event notification in SMU” in the 2300 Modular Smart Array Reference
Guide This document is available at http://www.hp.com/support/manuals. On the Manuals
page, select storage >Disk Storage Systems > MSA Disk Arrays >HP 2000sa G2 Modular
Smart Array or HP P2000 G3 MSA Array Systems.) Refer to the HP StorageWorks 2xxx
Modular Smart Array Reference Guide for other MSA versions.
A Modular Storage Array (MSA) unit should be discovered with its IP address. Once discovered,
locate the Entitlement Information section of the Contract and Warranty Information page and
update the following:
◦ Enter X9000 as the Custom Delivery ID
◦ Select the System Country Code
◦ Enter the appropriate Customer Contact and Site Information details
• Contract and Warranty Information
Under Entitlement Information, specify the Customer-Entered serial number, Customer-Entered
product number, System Country code, and Custom Delivery ID.
Configuring HP Insight Remote Support on StoreAll systems 43