6.3 HP StoreAll 9300/9320 Storage Administrator Guide (AW549-96072, June 2013)

You can create additional user VIFs and assign standby NICs as needed. For example, you might
want to add a user VIF for another share on server ib69s2 and assign a standby NIC on server
ib69s1. You can also specify a physical interface such eth4 and create a standby NIC on the
backup server for it.
The NICs panel on the GUI shows the NICs on the selected server. In the following example, there
are four NICs on server ib69s1: bond0, the active cluster FM/IP; bond0:0, the management
IP/VIF (this server is hosting the active FM); bond0:1, the NIC created in this example; and
bond0:2, a standby NIC for an active NIC on server ib69s2.
Configuring High Availability on the cluster 59