Ignite-UX Administration Guide for HP-UX 11i (B3921-90080, November 2013)

• INSTCMDS and INSTCMDSIA — A compressed tar archive of commands required for
specifying the system configuration to install on PA-RISC and Itanium-based systems,
respectively. It includes commands needed to set up disk volumes and file systems.
• SYSCMDS and SYSCMDSIA — A compressed tar archive of commands required for installation
of PA-RISC and Itanium-based systems, respectively. It includes commands needed to complete
installation and recovery.
• RECCMDS and RECCMDSIA — A compressed tar archive of commands required for expert
recovery on PA-RISC and Itanium-based systems, respectively.
• SCRIPTS — A configuration clause of commands containing scripts that can be selected in the
itool under the Advanced tab.
• PAD — A file used to reserve space for future content, control the size and position of content,
or both.
• VERSION — A file containing the Ignite-UX version used to produce the stored content. This
is to make sure the Ignite version used to create the content is the same version of Ignite you
are currently running. Mismatched versions can result in incorrect operation.
IMPORTANT: The first 8 KB of the install file system [W|V|I]INSTALLFS can contain Ignite-UX
text. If it does, this information is used first and can override configuration statements in the LIF
INDEX and CONFIG files. In particular, the information in the first 8 KB can cause the client to
boot from media and use an Ignite-UX server to complete installation, and controls if the installation
or recovery is interactive or not.
For more information, see “Using Configuration Files” (page 159).
238 LIF Volume Contents