HP Intelligent Management Center v5.1 SP1 Application Manager Administrator Guide
32
Application Type—It is not applicable to be modified.
Index—It is not applicable to be modified.
Threshold Type—It is not applicable to be modified.
Threshold Condition—Specify the threshold condition, the available options are greater
than or equal to and less than or equal to.
Unit—Specify the unit for the threshold, its value is depended on the monitor index type.
Specially, some index does not have a unit, such as the physical thread count of .Net server.
Enable Level-1 Threshold—Enable or Disable the Level-1 threshold for the monitor index.
Threshold —Specify the threshold condition, APM will activate the related major alarm
when the monitor index meets the threshold.
Enable Level-2 Threshold—Enable or Disable the Level-2 threshold for the monitor index.
Threshold —Specify the threshold condition, APM will activate a related critical alarm
when the monitor index meets the threshold.
6. Click OK.
Setting the custom threshold
To configure the custom threshold:
1. Click Resource>Application Management.
2. There are two ways to set the custom threshold.
See the first one as below:
a. In the navigation tree, click Application Monitor to open the application monitor list.
b. Click the target application name to open the monitor details page.
c. Click the threshold setting icon to open the Threshold Setting page.
See the second way as below:
d. In the navigation tree, click Custom Monitor to open the custom monitor list.
e. Click the view icon to open the custom monitor report.
f. Click the threshold setting icon to open the Threshold Setting page.
NOTE:
If you set a threshold in the application monitor report page, the same threshold has been changed
simultaneously in the custom monitor.
3. Select the threshold type. It has two available choices: User-defined and Global. The
following conditions only can be modified when you select User-defined. The default value is
Global.
4. Specify the custom threshold conditions:
Threshold Condition—Specify the threshold condition, the available options are greater
than or equal to and less than or equal to. According to different index select the right one.