HP Intelligent Management Center v5.1 SP1 Application Manager Administrator Guide

 History icon —Click the History icon for a disk to view statistics of the history space

usage trend of the disk. By default, the graph shows the last hour statistics. To change the

report period, click the Last 6 Hours icon , Today icon , Yesterday icon , This Week

icon , This Month icon , or This Year icon on the upper right of the graph as

needed. Hourly data and today's data is collected every polling interval, yesterday's, weekly,

and monthly data is collected in hours, and yearly data is collected in days. The statistics

graph contains maximum, minimum, and average disk space usage ratios. Place the cursor

over a spot in the curve to view disk space usage ratios at the specific time point.

• In Use—Used space of the disk.

• Free Space—Free space of the disk.

Network Interface

Figure 19 shows the Network Interface area layout.

Figure 19 Network Interface area layout

The Network Interface area contains the following fields:

• Refresh icon —Click the Refresh icon to refresh the area.

• Name—Name of the network interface card (NIC). APM monitors both physical and virtual (or

logical) network interface cards.

• Bandwidth—Maximum bandwidth of the NIC.

• Receive Rate—Receive rate of the NIC in the last polling period.

 Set Threshold icon —Click the Set Threshold icon for a NIC to set receive rate alarm

thresholds for it. The receive rate is highlighted in yellow when it reaches the level-1 threshold,

and is highlighted in red when it reaches the level-2 threshold. You can use either the global

thresholds or user-defined thresholds.

 History icon —Click the History icon for a NIC to view statistics of the history receive

rate trend of it in a line graph. By default, the graph shows the last hour statistics. To change

the report period, click the Last 6 Hours icon , Today icon , Yesterday icon , This

Week icon , This Month icon , or This Year icon on the upper right of the graph

as needed. Hourly data and today's data is collected every polling interval, yesterday's,

weekly, and monthly data is collected in hours, and yearly data is collected in days. The

statistics graph contains maximum, minimum, and average interface receive rates. Place the

cursor over a spot in the curve to view receive rates at the specific time point.

• Send Rate—Send rate of the NIC in the last polling period.

• Input Packet Loss—Number of inbound packets lost per second on the NIC in the last polling

period.

• Output Packet Loss—Number of outbound packets lost per second on the NIC in the last polling

period.

Process

By default, APM does not monitor any process, and the process list is empty. To monitor specific

processes, click the Config icon on the upper right of the area, and select the processes you want