HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

161
 Name—Identifier of a network interface card in HP-UX. APM monitors both physical and virtual
(logical) network interface cards.
 Output Packet Rate—Number of outbound packets per second on the network interface card in the
last APM polling period.
 Set Threshold icon —Click the Set Threshold icon to set alarm thresholds for the output
packet rate of HP-UX network interface cards. The data is highlighted in orange when the
receive rate reaches the level-1 threshold, and is highlighted in red when the receive rate
reaches the level-2 threshold. Use the global thresholds or custom thresholds. For information
about setting the thresholds, see "5 Configuration management."
 Input Packet Rate—Number of inbound packets per second on the network interface card in the last
APM polling period.
Error Log
APM examines the HP-UX error logs during polling and displays the first 10 error logs obtained in the
HP-UX application monitor report. The Error Log area layout is shown in Figure 113.
Figure 113 Error Log area layout
Error Log area fields:
 Time—Time when the error occurred.
 Log—Content of the error log.
 More—Click the More to view all error logs in last polling of the HP-UX system.