HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

462
parameter settings, and to determine whether to add the application monitor based on the
verification result. APM adds the application monitor only when it can connect to the
application. When this parameter is not selected, APM adds the application monitor without
verifying the connection.
5. Click OK.
Modifying an SFTP service application monitor
Authorized users can modify all parameters except the IP address of an SFTP service application monitor.
When the IP address of a monitored SFTP host changes, authorized users must add a new application
monitor for the host. The new application monitor cannot inherit the history data from the previous
application monitor.
To modify an SFTP service application monitor:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The page displays all application types that can be monitored by APM.
3. Click the Modify icon for the SFTP service application monitor you want to modify.
The page for modifying the SFTP service application monitor appears.
4. Modify the following parameters:
 IP Address—Cannot be modified.
 Name—Modify the unique application monitor name. HP recommends using Application
name_host IP address for naming the application monitor.
 Description—Modify a description for the application monitor .
 Username—Modify the SFTP username.
 Password—Modify the password of the SFTP user.
 Whether to Download File—Select Yes if you want to test the download function of SFTP.
Otherwise, select No.
 Remote Source File Name—Enter the test file name, which must contains the relative path of the
file to the directory on the SFTP host.
 Local Source File Name—Enter the local test file name, which must contains the absolute path of
the file.
 Whether to Upload File—Select Yes if you want to test the upload function of SFTP. Otherwise,
select No.
 Local Source File Name—Enter the local test file name, which must contains the absolute path of
the file.
 Remote Source File Name—Enter the test file name, which must contains the relative path of the
file to the directory on the SFTP hosting device.
 Port—Modify the port on SFTP.
 Traffic Collection Port—Modify the service port number for SFTP. This field appears only when
at least one probe is configured for APM.
 Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30 in minutes. A shorter polling interval provides more
accurate real-time data but consumes more system resources.