HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

45
5. Configure the following parameters:
 Name—Modify the name of the probe. The name must be unique in APM.
 IP Address—Modify the IP address of the probe.
 Description—Modify the description of the probe to aid maintenance.
 Password—Modify the password for APM to access the probe. The password must be the same
as that configured on the probe.
6. Click OK.
Deleting a probe
1. Click the Resource tab.
2. Select Application Manager > Configurations from the navigation tree.
The Configurations page appears.
3. Click Probe Configuration.
The Probe List appears.
4. Click the Delete icon for the probe you want to delete.
A confirmation dialog box appears.
5. Click OK.
Deploying network configuration to probes
When you add an application monitor, APM automatically sends the network configuration (IP address
or IP-to-port combination) of the monitored application to probes. If the network configuration failed to
be delivered, troubleshoot the communication failure and manually deploy the network configuration to
probes.
To deploy the network configuration of monitored applications to probes:
1. Click the Resource tab.
2. Select Application Manager > Configurations from the navigation tree.
The Configurations page appears.
3. Click Probe Configuration.
The Probe List appears.
4. Click Deploy.
APM deploys the network configuration of monitored applications to all probes on the list.
Parameter Configuration
APM operating parameters include the monitor data retention periods and data background colors.
Operators can modify these parameters in Parameter Configuration.
To modify APM operating parameters:
1. Click the Resource tab.
2. Select Application Manager > Configurations from the navigation tree.
The Configurations page appears.
3. Click Parameter Configuration.