HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

168
 Username—Enter the Telnet username. The user must have the Linux administrator's
privilege.
 Password—Enter the password of the Telnet user.
 Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
 Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from Linux. The value range is 1 to 60 seconds and the default is 4 seconds. If no
Telnet response is received from Linux within the timeout time, APM considers that the
interaction has failed.
SNMP parameters
 Edit SNMP Parameters—Select this option if you want to manually configure SNMP
parameters for APM. Make sure the SNMP settings are the same as those on Linux.
 Select an Existing Template—Select this option if you want to select an existing SNMP
template for APM. For information about setting SNMP parameter templates, see HP IMC
Base Platform Administrator Guide.
 Parameter Type—Select the SNMP parameter type. Options include SNMPv1, SNMPv2c,
and SNMPv3 Template. The SNMPv3 Template option is available only when Select an
Existing Template is selected.
 Read-Only Community String—Enter the SNMP read-only community string, with which
APM can read MIB variables from the Linux host.
 Read-Write Community String—Enter the read-write SNMP community string, with which
APM can read MIB variables from or write MIB variables to the Linux host.
 Timeout (1-60 seconds)—Enter the maximum time period that APM waits for an SNMP
response from Linux. The value range is 1 to 60 seconds and the default is 4 seconds. If no
SNMP response is received from Linux within the timeout time, APM considers that the
interaction has failed.
 Retries (1-20)—Enter how many times APM retries to send SNMP packets to the Linux host.
 Contact—Modify the contact information, such as name, email address, and telephone
number.
 Related Applications—Modify the applications that Linux depends on. Click Add, and then
select applications in the popup Select Applications window. Operating system applications,
such as Windows, AIX, FreeBSD, OpenBSD, HP-UX, Solaris, Mac OS, and Linux, cannot be
selected. The overall dependencies between applications can be viewed in the application
topology. To delete applications, select the applications in the Related Applications box and
click Delete.
 Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to modify the application monitor based on the
verification result. APM modifies the application monitor only when it can connect to the
application. When this parameter is not selected, APM modifies the application monitor without
verifying the connection.
5. Click OK.
Viewing the Linux application monitor report
After adding the Linux application monitor, APM collects application index data to calculate its
availability and health status. Obtain monitor indexes for Linux by viewing the monitor report.