HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

29
Icon
Description
Represents the physical network to which an access device is connected.
Represents dependencies between two applications that use the same IP address.
A dashed line represents indirect dependencies between the applications. Indirect
dependencies are generated when the current operator has no management privileges to
one or more intermediate applications.
Represents dependencies between two applications that use different IP addresses.
A dashed line represents indirect dependencies between the applications. Indirect
dependencies are generated when the current operator has no management privileges to
one or more intermediate applications.
Represents the connection between a host and an access device or between an access
device and the physical network.
For a host-to-access device connection, the port that connects the host to the access device
is also displayed.
A dashed line represents an indirect connection between a host and the physical network.
An indirect connection is displayed when the access device is not added to the IMC
Platform. For information about adding devices to IMC, see HP IMC Base Platform
Administrator Guide.
Viewing a dependency topology
A dependency topology focuses on a single application and displays its dependencies with other
applications, directly or indirectly.
To view the dependency topology of a monitored application:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The application monitor list page displays all application monitors.
3. Click the Dependency Topology icon for the application for which you want to view the
dependency topology.
The dependency topology window appears, as shown in Figure 15. The dependency topology
contains only application icons and lines. For the icon description, see Table 4.