HP Intelligent Management Center v5.2 Application Performance Manager Administrator Guide

442
Adding JavaRuntime application monitor
When you add application monitors for JavaRuntime, follow these guidelines:
 The target hosts must be added to the IMC Platform so that the connections between the devices and
access devices can be obtained. For information about adding devices to the IMC Platform, see HP
IMC Base Platform Administrator Guide.
 If authentication is required for remote RMI access (the value for
Dcom.sun.management.jmxremote.authenticate is true), get the username and password in
advance.
 To view traffic statistics in the monitor report of the JavaRuntime application, make sure at least one
probe is configured in APM. After a JavaRuntime application monitor is added, APM sends the IP
address and port number of the monitored JavaRuntime application to the probes for traffic
collection.
To add a JavaRuntime application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
 Select Application Manager > Add Application from the navigation tree.
The page displays all application types that can be monitored by APM.
 Select Application Manager > Application Monitor from the navigation tree, and then click Add
on the application monitor list page.
3. Click JavaRuntime of the Service Monitor class.
The page for adding a JavaRuntime application monitor appears.
4. Configure the following parameters:
 IP Address—Enter the IP address of the host on which the JavaRuntime application to be
monitored is installed. If the host is already added to the IMC Platform, you can also click Select
and select the host in the Select Devices window. For information about selecting a host, see "2
Quick start." APM automatically checks the specified IP address and associates the application
monitor with the host managed in the IMC Platform.
 Name—Enter a unique application monitor name. HP recommends using Application
name_host IP address for naming the application monitor.
 Description—Enter a description for the application monitor.
 Port—Enter the RIM port. Make sure the port number is the same as that specified in the script
Dcom.sun.management.jmxremote.port.
 Traffic Collection Port—Enter the JRE application service port. This field appears only when at
least one probe is configured for APM.
 Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources.
 Username and Password—Enter the authentication username and password for remote RMI
access. If the authentication is not enabled, these fields are not needed.
 JNDI—Enter the JNDI name for RMI access. The well-known JNDI name is jmxrmi.
 Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor.