HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

2. Configure the BIMS URL, connection username and password, as shown in Figure 10.
Figure 10 Initial configuration command lines
NOTE: The commands vary depending on the device type. For more information, see the
user guide for the corresponding device.
Importing CPE software to BIMS
This task imports the latest version (V1.5) of CPE software saved in your local client to BIMS.
To import the CPE software:
1. Click Service > BIMS > Configuration Management > Software Library.
The Software List appears.
2. Click Import....
3. On the Import CPE Software page, click the Source File to the right of the Source File field,
and then click Browse....
4. On the Choose File to Upload dialog box, select the software file MSR20-20130015.app,
and then click Open.
The full path and name of the file you selected appears in the Source File field.
5. Click OK.
The software file MSR20-20130015.app appears in both the Source File and Target File
fields.
6. Set the Software Version as V1.5.
7. Click Select Class, select the CPE class HP MSR20–10 from the Class List, and then click OK.
22 Typical BIMS applications