HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

Additional information
The customized additional information appears here only if you added it before. For
more information about the additional information function, see “Adding CPE additional
information.”
3. Click OK.
The CPE that you added appears in the CPE List.
Quickly adding CPEs
To quickly add new CPE devices:
1. Click Service > BIMS > Resource Management > Add CPE.
2. On the Add CPE page, click Quickly Add CPE.
3. On the Quickly Add CPE page, specify the following:
• Serial ID—For the first time, you must enter the CPE serial ID manually. After that, the
serial ID is assigned by BIMS automatically.
• OUI—Enter the organizationally unique identifier of the vendor. The OUI should be six
hexadecimal characters.
• CPE Name—Enter the CPE name, or accept the default, which is set to OUI + Serial
ID.
• CPE Class—For the first time, you must select a CPE class from the list manually. After that,
the CPE Class is assigned by BIMS automatically.
• CPE Group—For the first time, you can specify a CPE Group or keep it null manually.
After that, the CPE Group is assigned by BIMS automatically.
4. Click OK to add the next CPE device.
5. Click Cancel to quit the adding procedure.
Modifying a CPE
To modify a CPE:
1. Click Service > BIMS > Resource Management > All CPEs.
2. On the All CPEs page, select the target CPE from the CPE list, and then click the CPE name.
3. On right side of the CPE Details page, click Modify CPE Name in the Apply pane to modify
the OUI and Serial ID.
NOTE: The modify function is only available for virtual CPE devices.
Deleting one or more CPEs
To delete one or more CPEs:
1. Click Service > BIMS > Resource Management > All CPEs.
2. On the All CPEs page, select one or more target CPEs in the list by selecting their check boxes.
3. Click Delete.
Viewing CPE device details
To view the CPE device details:
1. Click Service > BIMS > Resource Management > All CPEs.
2. On the All CPEs page, click the target CPE name in the CPE List to open the CPE Details page.
36 Resource management