HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

g. You can click the Delete icon to delete a specific CPE, or click Delete All to delete
them all.
7. When you finish the CPE and CPE class adding procedure, click OK to go back to the Check
Task page.
A message appears on the top of the Check Task page confirming that the check task adding
procedure is successful.
Modifying a check task
To modify a check task:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, click the Modify icon in the target check task row.
3. On the Modify Check Task page, reset the Start Time and Description.
4. Click OK.
NOTE: The Execute Task and Severity parameters cannot be modified. Only check tasks set to
execute Periodically can be modified. You cannot modify a check task when its status is Finished.
Deleting a check task
To delete a check task:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, select one or more check tasks by selecting their check boxes.
3. Click the Delete on the top of the task list.
NOTE:
• You cannot delete an executing task.
• Deleting a check task causes the loss of its history records.
Viewing check task details
To view check task details:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, click the target task name.
3. On the Task Details page, check the Task Name, Severity, Execute Task, and Description
information in the Task Attributes pane. This information cannot be modified here.
4. Compliance policies are listed in the Compliance Policy Information pane. You can check the
rule details by clicking a specific policy name. For more information about compliance policy,
see “Adding a compliance policy.”
5. Check the Status, CPE Name, IP Address, and CPE Class in the CPE Information pane.
Running a check task immediately
To execute a check task immediately:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, select one or more check tasks by selecting their check boxes.
3. Click Run on the top of the task list.
NOTE: You cannot run a check task immediately when its status is Finished or Executing.
88 Compliance Center