HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

Figure 6 Adding a configuration template
4. Click OK.
The configuration template hp5820_startup configuration.cfg appears in the
startup configuration template folder.
For more information, see “Creating a configuration template.”
Creating an automatic deployment task
To create an automatic deployment task:
1. Click Service > BIMS > Configuration Management > Deployment Guide.
2. On the Deployment Guide page, click the By CPE icon in the Auto Deploy Configuration
field.
3. Select the startup configuration folder, and then select the configuration template
hp5820_startup configuration.cfg.
4. Select Startup Configuration from the File Type to be Deployed list box.
5. Click Select CPE, select the virtual CPEs added in previous procedure, and then click OK.
The selected CPE appears in the CPE-to-Deploy list, as shown in Figure 7.
18 Typical BIMS applications