HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

To fix the violating CPE:
1. On the Check Task page, select the check task link-protocol check, and then click the Fix icon
under the Fix column.
2. On the Rule Violating Overview page, review the violating details form the list, and then select
the check box to the left of the compliance policy link-protocol.
3. Click Fix on the upper left corner of the page.
4. As shown in Figure 20, enter link-protocol PPP in the Fixing Commands text box, and
then click Next.
Figure 20 Fixing Commands
5. On the Set Task Attributes page, complete the attributes as follows and as shown in Figure 21:
• Task Name: link-protocol fixing
• Task Type: Fix Violating CPEs
• Operation Type: One-off
• Operation Time: Immediately
• Description: link-protocol fixing
Figure 21 Set Task Attributes
For more information, see “Fixing a check task.”
32 Typical BIMS applications