HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

8. Set the following attributes to specify how the task is executed:
• Task Name—Enter a task name. By default, the task name is Task+current time.
• Operation Type—Select One-off to create a task that is executed only once. Select
Periodical to create a task that is executed periodically.
A Periodical task can be executed monthly, weekly, or daily.
• Operation Time—Set the task execution time. The options include:
Immediately—Execute the deployment task immediately.◦
◦ Scheduled—Schedule a date and time to execute the deployment task.
◦ Quickly—Select this option for creating a deployment task for the NAT CPEs. BIMS
can then execute a deployment task to it only when the NAT CPE polls BIMS.
• Description—Enter the task description.
9. Click OK to create a deployment task.
You can view the execution result of the task on the Deployment Task page. For more information,
see “Managing deployment tasks.”
Deploying CPE software
This function enables you to deploy software stored in the Software Library to the specified CPEs.
To deploy CPE software:
1. Click Service > BIMS > Configuration Management > Deployment Guide.
The Deployment Guide page appears.
2. Click the Deploy Software icon .
BIMS generates a task for deploying CPE software.
3. Click Select, and then select the CPE software you want to deploy.
4. Set the following attributes to specify how the deployment task is executed:
• Task Name—Enter a task name. By default, the task name is Task+current time.
• Operation Type—To deploy CPE software, you must select One-off to create a task that
is executed only once.
• Operation Time—Set the task execution time. The options include:
Immediately—Execute the deployment task immediately.◦
◦ Scheduled—Schedule a date and time to execute the deployment task.
◦ Quickly—Select this option for creating a deployment task for the NAT CPEs. BIMS
can then execute a deployment task to it only when the NAT CPE polls BIMS.
• Description—Enter the task description.
5. Select the target CPEs:
a. Click Select CPE, and then select the check boxes associated with the CPEs to which you
want to deploy the software.
b. Click OK.
The selected CPEs appear in the CPE-to-Deploy list.
c. View the Check Result of each CPE you selected.
d. Click the Delete icon to remove all the CPEs that cannot pass the check.
64 Configuration management