HP Intelligent Management Center v5.2 Branch Intelligent Management System Administrator Guide

Enabling or disabling a check task
This function is available only when the check task execution is set to Periodically or the Operation
column in the task list is empty.
To enable or disable a check task:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, select a target check task, and click Enable or Disable under the
Operation column to enable or disable the check task.
Checking task execution results
To check task execute results:
1. Click Service > BIMS > Compliance Center > Check Task.
2. On the Check Task page, select a target check task, and then click the severity level options
under the Check Results column.
The Task Execution Results page appears. This page has five panes, as shown in Figure 29.
Managing check task 89