HP Intelligent Management Center v5.1 TACACS+ Authentication Manager Administrator Guide

122
To configure the TAM system operation log parameters:
1. Click the Service tab.
2. Select TACACS+ AuthN Manager > System Parameters > System Configuration from the
navigation tree.
The System Configuration list displays all system configurations.
3. Click the Configure icon for the System Operation Log Parameters entry.
4. Configure the system operation log parameters:
 Log Level—Select a level from the list for the TAM system operation logs. Log levels in
descending order of severity include Fatal, Error, Warning, Info, and Debugging. With the log
level configured, TAM records system operation logs of the specified level and all above levels.
Do not use the debugging level except for troubleshooting, because it greatly consumes system
resources.
 Log Lifetime—Specify how long TAM keeps the log files. TAM automatically deletes the log
files that exceed the log lifetime at 00:00 every day.
5. Click OK.
Validating the system configuration
After you change the system parameters, the TAM console informs the daemon threads to immediately
validate the configuration. If the request fails, you can manually validate the system configuration.
To manually validate the system configuration:
1. Click the Service tab.
2. Select TACACS+ AuthN Manager > Service Parameters > Validate from the navigation tree.
If the validation fails, the system prompts the failure reason.