HP Intelligent Management Center v5.1 TACACS+ Authentication Manager Administrator Guide

<Device>system-view

[Device]hwtacacs scheme test

[Device-hwtacacs-test]primary authentication 192.168.0.96 49

[Device-hwtacacs-test]primary authorization 192.168.0.96 49

[Device-hwtacacs-test]primary accounting 192.168.0.96 49

[Device-hwtacacs-test]key authentication hello

[Device-hwtacacs-test]key authorization hello

[Device-hwtacacs-test]key accounting hello

[Device-hwtacacs-test]nas-ip 190.12.0.2

[Device-hwtacacs-test]user-name-format without-domain

[Device-hwtacacs-test]quit

[Device]domain tel

[Device-isp-tel]authentication login hwtacacs-scheme test

[Device-isp-tel]authentication super hwtacacs-scheme test

[Device-isp-tel]authorization login hwtacacs-scheme test

[Device-isp-tel]authorization command hwtacacs-scheme test

[Device-isp-tel]accounting login hwtacacs-scheme test

[Device-isp-tel]accounting command hwtacacs-scheme test

[Device-isp-tel]quit

[Device]user-interface vty 0 4

[Device-ui-vty0-4]authentication-mode scheme

[Device-ui-vty0-4]command authorization

[Device-ui-vty0-4]command accounting

Configuring the PC of the device user

A user only needs to log in to the device by using the related client software.

Configuring LDAP authentication + TAM local

authorization

Configure LDAP authentication and TAM local authorization on the LDAP server, the device, and the PC

used by the device user, respectively. Figure 10 shows the recommended configuration procedure.