HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

Viewing history connect rate records of an EVI service
You can only use this function for the EVI services that are in Success state.
1. Click the EVI Services tab.
2. In the service list, click the Operation icon for the service, and then select Connect Rate.
3. Click the Last Day, Last Week, Last Month, Last Year, or Custom Time Range link in the chart
to view connectivity information for the selected time range.
Viewing the network topology for an EVI service
To view the network topology:
1. Click the EVI Services tab.
2. In the service list, click the Operation icon for the service, and then select Topology.
The network topology of the EVI service is displayed.
For more information, see "Managing LAN topologies."
Managing EVI links
An EVI link is the virtual link between two edge devices at different DCs.
You can use EVI link management to monitor the EVI links in an EVI network.
Viewing the EVI link list
To view the EVI link list:
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > LAN Configuration > EVI.
3. Click the EVI Link List tab.
EVI link list contents
• Refresh—Click this link to refresh the EVI link list.
• Status—Status of the EVI link.
• EVI Service—EVI service that contains the EVI link. Click the name to view the basic settings
and topology of the EVI service. For more information, see "Viewing basic information
and topology of an EVI service."
• EVI Link Name—The name of the EVI link that is automatically assigned by VFM. The
format is west-device label_EVI-link ID.
• West-Device Name—Name of the west device. For each EVI link, VFM automatically
chooses the device with the lower IP address as the west device. By default, this field
displays the device label and the device IP address. The device label is assigned in the
IMC Platform. The device IP address is the IP address used when the device was added
to the IMC Platform. For more information, see HP IMC Base Platform Administrator Guide.
• West Interface Description—Tunnel source interface of the EVI link on the west device.
• East-Device Name—Name of the east device. For each EVI link, VFM automatically
chooses the device with the higher IP address as the east device. By default, this field
displays the device label and the device IP address. The device label is assigned in the
IMC Platform. The device IP address is the IP address used when the device was added
to the IMC Platform. For more information, see HP IMC Base Platform Administrator Guide.
• East Interface Description—Tunnel source interface of the EVI link on the east device.
• Delay—Click the Delay icon to view traffic delay on the EVI link. For more information,
see "Viewing EVI link delay."
126 Managing EVI