HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

QoS Policy Name—Enters the QoS policy name for associating the class with the behavior.
WRR Queuing Type—Selects a WRR queuing type from the list. Options include byte-count
and weight. The byte-count means allocating bandwidth to queues in terms of bytes. The
weight means allocating bandwidth to queues based on weights.
4. Click OK.
VSAN auto discovery
This function allows you to discover VSANs and FCoE switches in fabrics.
To discovery VSAN automatically:
1. Select the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > VSAN Auto
Discovery.
3. Configure the following parameters:
Minimum/Maximum VSAN ID—Specify the VSAN discovery scope.
Select Data Center—Select data centers that have been added to VFM from the list.
Select Switch—Select the seed switch from the list, which must be an FCoE switch.
4. Click the Auto Discovery button. Auto discovery takes some time.
After auto discovery is complete, the VSAN discovery result page appears.
VSAN Discovery Result—Presents the discovery result for each VSAN in a table. The table lists
all VSANs failing to be discovered and then all the VSANs successfully discovered.
Start Time/End Time—Start time/End time for VSAN auto discovery.
Time—When the VSAN was discovered.
Discovered VSANs—Discovered VSAN ID.
Switch Count—Number of switches in the discovered VSAN.
Result—Display the discovery results. Successful means VSANs have been discovered
successfully. If the discovering process fails, the failure reasons are displayed.
Device Import Result:
Time—Start time/end time of VSAN discovery procedure and the specific time when a
device was imported.
Result—Result of the import operation.
Fabric management
In VFM, a fabric refers to a network composed of FCoE switches, servers, and storage devices.
Fabric management manages fabrics, FCoE switches, servers, storage devices, VSANs, and zones.
Managing fabrics
VFM manages FCoE switches, servers, storage devices, and VSANs in a fabric as elements of the
fabric.
Viewing the fabric resource tree
To view the fabric resource tree:
1. Select the Service tab.
VSAN auto discovery 35