HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

2. From the navigation tree, select VAN Fabric Manager > SAN Configuration Manager > Fabric
Management.
The fabric resources tree is in the left pane of the Fabric Management page, and the fabric
list is in the right.
The fabric resources tree has five levels , as shown in Figure 11.
Figure 11 Fabric resource tree
• Level 1 menu—Fixed to Fabric Management. Displays the fabric list in the right pane.
• Level 2 menu—Name of the fabric. Displays detailed information about that fabric.
• Level 3 menu—VSAN ID. Displays detailed information about that VSAN.
• Level 4 menu—Elements and devices in the VSAN, including zone topology, global zone
configuration, active zone set, zone sets, zones, and zone aliases, switches, servers, and
storage devices.
◦ Zone Topology—Displays the zone topology in the right pane.
◦ Global Zone Configuration—Displays the global zone configuration in the right pane.
◦ Active Zone Set—Displays the active zone set in the VSAN and all its zones. If the
VSAN has no active zone set, this option does not appear.
◦ Zone Sets—Displays the zone set list in the right pane.
◦ Zones—Displays the zone list in the right pane.
◦ Zone Aliases—Displays the zone alias list in the right pane.
◦ Switches—Displays all FCoE switches in the VSAN.
◦ Servers—Displays all servers in the VSAN.
◦ Storage—Displays all storage devices in the VSAN.
NOTE: If any type of element does not exist in the VSAN, the corresponding level-4
menu does not appear.
36 Managing SANs