HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

After DCBX parameters are deployed to a CEE interface, the DCBXcolumn for the CEE interface
is displayed as . This indicates that interface DCBX parameters have been deployed and are
consistent in VFM and on the CEE interface.
Undeploying DCBX parameters from CEE interfaces
Perform this task to undeploy the DCBX parameters that have been deployed to CEE interfaces on
an FCoE switch.
To deploy DCBX parameters from CEE interfaces:
1. In the CEE interface list, select one or more CEE interfaces, and click Configure DCBX.
2. Select Undeploy DCBX from the menu.
VFM automatically synchronizes the FCoE switch while undeploying DCBX parameters from CEE
interfaces.
After DCBX parameters are undeployed from a CEE interface, the DCBXcolumn for the CEE interface
is displayed as . This indicates that interface DCBX parameters are not deployed and are
inconsistent in VFM and on the CEE interface.
Viewing VFC interfaces
To view a VFC interface:
1. In the FCoE switch list, click the icon for the target switch.
48 Managing SANs