HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide
1. In the storage list, click the Details icon for the target device.
The HBA Card area includes:
• WWN—WWN of the storage device HBA. If the HBA has only one N_Port, the HBA
WWN is the N_Port WWN. If the HBA has more than one N_Port, the HBA WWN is
selected from the N_Port WWNs.
• Node Name—WWN of the storage device.
• Vendor Name—Vendor of the HBA.
• Serial Number—Serial number of the HBA.
• Model—Model of the HBA.
• Model Description—Model description of the HBA.
• Hardware Version—Hardware version of the HBA.
• Driver Version—Driver version of the HBA.
• ROM or BIOS Version—ROM version of the HBA.
• Firmware Version—Firmware version of the HBA.
• OS Version—Operating system name and version number of the storage device.
• Maximum Payload—Maximum length of CT payload allowed by the HBA. The CT payload
includes the basic header and extended header of CT packets, but not the FC header.
The N_Port area includes:
• WWN—Manufacturer-initialized WWN of the port.
• Supported FC4 Types—FC4 types the port supports, including FCP, IP, LLC/SNAP, SW_ILS,
SNMP, GS3, VI, and NPV.
• Current Speed—Current transmission rate of the port in Gbps.
• Maximum Frame Size—Maximum frame size allowed by the port.
• OS Name—Name of the port in the storage device operating system.
• Host Name—Name of the storage device.
2. Click Back.
Synchronizing storage devices
VFM does not support direct synchronization of storage devices.
When you synchronize configurations of an FCoE switch to VFM, registration of storage devices
is also synchronized to VFM. For more information, see "Synchronizing FCoE switches."
Managing VSANs
A physical SAN can be divided into multiple VSANs. The isolated VSANs provide services
independently, which improves network flexibility and security. Devices in a VSAN cannot access
devices in other VSANs.
Viewing the VSAN list
To view the VSAN list:
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > Fabric
Management.
3. In the fabric list, click the target fabric name.
56 Managing SANs