HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

Figure 14 Active zone set
IMPORTANT: Activating a zone set might interrupt device operation.
Modifying a zone set
To modify a zone set:
1. In the zone set list, click the Operation icon and select Modify from the popup menu.
2. Enter a new zone set name. The name must unique in the VSAN.
3. Click OK.
Copying a zone set
To copy a zone set:
1. In the zone set list, click the Operation icon and select Copy from the popup menu.
2. Enter a new zone set name. The name must be unique in the VSAN.
3. Click OK.
The new zone set and the original zone set have the same configurations. The only difference
between them is their names.
Deleting zone sets
To delete a zone from a zone set:
1. From the zone set list, select one or more zone sets.
2. Click Delete.
A confirmation dialog box appears.
3. Click OK.
Deleting the active zone set removes it from the zone set list but not from the VSAN. You can
deactivate the active zone set in global zone configuration.
Adding zones to a zone set
To add a zone to a zone set:
Fabric management 67