HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide
1. Use one of the following methods to access the zone list:
• In the zone set list, click the target zone set name.
• In the fabric resources tree, click Fabric Management > the target fabric name > the target
VSAN name > Zone Sets > the target zone set name.
2. In the zone list area, click Add.
The Zone List displays all zones that are not members of the zone set.
3. Query the zones by name.
The Name field supports fuzzy matching.
4. From the Zone List, select one or more zones.
5. Click OK.
Deleting zones from a zone set
1. Use one of the following methods to access the zone list:
• In the zone set list, click the target zone set name.
• In the fabric resources tree, click Fabric Management > the target fabric name > the target
VSAN name > Zone Sets > the target zone set name.
2. From the zone list, select one or more zones.
3. Click Delete.
A confirmation dialog box appears.
4. Click OK.
Managing the active zone set
When a VSAN contains an active zone set, the fabric resources tree displays the Active Zone Set
node under the VSAN node, shown as Figure 14.
You cannot directly modify the configurations of an active zone set. You have to modify the
configurations of the original zone set and reactivate the zone set. The modified configurations
then override the configurations of the active zone set.
Viewing the active zone sets
To view the active zone sets:
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > Fabric
Management.
3. In the fabric resources tree, click Fabric Management > the target fabric name > the target
VSAN name > Active Zone Set: zone set name.
You can click Refresh to get the latest zone list.
Zone list contents
• Name—Name of the zone. Click the zone name to view its members.
• Member Count—Number of zone members in the zone.
• Member—Members in the zone.
Viewing a zone in the active zone set
To view a zone in the active zone set:
1. Open the Fabric Management page.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > Fabric
Management.
68 Managing SANs