HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

3. In the fabric resources tree, click Fabric Management >the target fabric name > the target
VSAN name > Zone Topology.
In the zone topology, you can perform the following operations:
• View the links between zone members and FCoE switches in the VSAN.
• Display or hide the Zone View and Zone Alias View area by clicking the Zone View icon
in the tool bar.
• View members of the zones or zone aliases you select from the Zone List or Zone Alias
List in the Zone View and Zone Alias View area.
For more information, see HP IMC Base Platform Administrator Guide.
SAN fast configuration
In SAN fast configuration, you can configure only one server and one storage device as a pair
for access between them at a time. To configure more pairs of servers and storage devices, you
must perform SAN fast configuration multiple times.
Prerequisites for SAN fast configuration
Along the path between the server and the storage device, the following requirements must be
met:
• Physical interfaces on all FCoE switches must be Layer 2 Ethernet interfaces in trunk mode.
• Physical interfaces on all FCoE switches must be bound to VFC interfaces.
• The DCBX configurations on all FCoE switches and on their physical interfaces must be
consistent with the DCBX configurations in VFM.
• All FCoE switches must have at least one common unmapped VLAN and one common
unmapped VSAN.
Performing SAN fast configuration
HP recommends synchronizing all FCoE switches in the fabric before you perform SAN fast
configuration.
To perform SAN fast configuration:
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > SAN Fast Config.
3. Use one of the following methods to select a fabric:
• In the Basic Information area, click Select. Query the fabrics, select the target fabric, and
click OK.
• In the topology, double-click the target fabric.
4. To add a pair of server and storage device:
a. In the Access List, click Add.
b. Select the target server. This field supports the suggestion function. For example, if you
enter 5, all servers that contain 5 in their name or IP address are displayed. Enter a blank
space to display all servers in the fabric.
c. Select the target storage device. This field supports the suggestion function. For example,
if you enter 5, all storage devices that contain 5 in their name or IP address are displayed.
Enter a blank space to display all storage devices in the fabric.
d. Click OK.
The server and storage device pair appears in the Access List.
Steps 5 and step 6 are optional.
SAN fast configuration 75