HP Intelligent Management Center v7.0 VAN Fabric Manager Administrator Guide

• Inhibition Time—Specify the inhibition time of the RB. When the RB detects that a root
bridge change occurs on a link or that the AVF advertised by other RBs conflicts with the
local AVF, the RB inhibits the local AVF for a certain time to avoid loops. When the
inhibition timer expires, if the RB is still the AVF of the VLAN, the RB restores the role of
the AVF.
• CSNP Interval—Specify the CSNP interval. On a broadcast network, the DRB advertises
CSNPs at the CSNP interval to perform network-wide LSDB synchronization.
• Minimum LSP Interval (Milliseconds)—Specify the minimum LSP interval. RBs periodically
advertise LSPs to avoid frequent LSP aging on the network.
7. Click OK.
8. Click Back to go back to the TRILL Interface List page.
Modifying TRILL configuration of an interface
To modify the TRILL configuration of an interface:
1. Open the RB List page.
2. Click the Operation icon for the target RB.
3. Select Interface List from the shortcut menu.
The TRILL Interface List page displays all interfaces of the RB.
4. Click the Modify icon for the target interface.
The Modify Interface page appears.
5. Do one of the following:
• To enable TRILL on the interface, select Yes from the Enable TRILL Interface list, and
configure the TRILL parameters as needed. For more information, see "Configuring TRILL
interfaces in batches."
• To disable TRILL on the interface, select No from the Enable TRILL Interface list.
6. Click OK.
84 Managing TRILL