HP Insight Cluster Management Utility v7.1 User Guide

NOTE: These IDE settings only apply to the DL160 G5 Server.
• IPMI
Serial Port assigned to System◦
◦ Serial Port Switching Disabled
◦ Serial Port Connection Mode Direct
• LAN
Share NIC mode Disabled◦
◦ DHCP Disabled
• Remote Access
Remote access Enabled◦
◦ Redirection Always
◦ Terminal VT100
• Boot Configuration
Boot Order◦
1. Embedded NIC
2. Disk or smart array
◦ Embedded NIC1 Enabled
2.1.7.3 DL160 G6 Servers
• IPMI
Serial Port assigned to System◦
◦ Serial Port Connection Mode Direct
• PCI
NIC1 control Enabled◦
◦ NIC1 PXE Enabled
• SATA
SATA#1 Controller Mode AHCI◦
• Boot Configuration
Boot Order◦
1. NIC
2. CD
3. Disk
2.1 Installing HP Insight CMU 17