HP BladeSystem Management Pack (v 1.x) for Microsoft System Center User Guide

2 Installing HP BladeSystem Management Pack 1.x
This chapter contains the information for installing the HP BladeSystem Management Pack 1.x
available for downloading from HP.
Installation overview
NOTE: You must register the BladeSystem c-Class enclosure with the Enclosure Monitor Manager
to complete the installation of HP BladeSystem Management Pack. For more information, see “Using
the Enclosure Monitor Manager” (page 14).
To install the management pack:
1. Download the management pack from the HP website (http://h18013.www1.hp.com/
products/servers/management/mom2007/index.html), and then unzip the file.
2. Run the self-extracting executable kit, and then select the management pack to install.
The following kits are available for selection.
DescriptionFile nameKit name
Installs HP BladeSystem Enclosure
management capability in an x86
environment
HPBladeSystemMP0n_n(x86).exeHP BladeSystem Enclosure
Management Pack for Operations
Manager (x86)
Installs HP BladeSystem Enclosure
management capability in an x64
environment
HPBladeSystemMP0n_n(x64).exeHP BladeSystem Enclosure
Management Pack for Operations
Manager (x64)
NOTE: In the file names, n_n represents the version number (for example, use 1_5 for version
1.5).
3. Install the HP BladeSystem Management Pack for Operations Manager into the appropriate
environment.
• Complete installation
All modules on the Operations Manager server environment including Management Pack,
Enclosure Monitor Service, Enclosure Monitor Manager, and documents
• Custom installation
◦ HP BladeSystem Management Pack on the Operations Manager server environment
◦ HP BladeSystem Enclosure Monitor Service and the HP BladeSystem Enclosure Monitor
Manager on a managed node environment (requires .NET 2.0 framework, PowerShell
version 1.0, and SNMP trap service)
◦ HP BladeSystem Enclosure Monitor Manager on the Operations Manager console
environment (requires .NET 2.0 framework)
4. To launch HP BladeSystem Enclosure Monitor Manager, select the Launch HP BladeSystem
Enclosure Monitor Manager check box.
The installer imports the management packs to the Operations Manager server.
5. Register the HP BladeSystem c-Class enclosures in the HP BladeSystem Enclosure Monitor
Manager.
6. To view HP BladeSystem c-Class enclosures in the Operations Manager console, complete
the post-installation procedures.
8 Installing HP BladeSystem Management Pack 1.x