Backing up and restoring HP Insight Management 7.3 Central Management Server (Windows)

Technical white paper | HP Insight Management 7.3

RESOLUTION: Delete storage volume "\Virtual Disks\SPM\Volume4" in

storage array "" from the SPM catalog. This is

necessary to avoid the storage volume from being

reassigned to another resource. This can occur if, as

a post-backup activity the storage volume was added

to a newly created SPE and the SPE was associated to

a logical server. [ID001]

Checking \Virtual Disks\SPM\Volume8

Delete storage volume "\Virtual Disks\SPM\Volume8" in array "" from

SPM catalog...........................................................[INPUT]

ISSUE: Storage volume "\Virtual Disks\SPM\Volume8" is marked

as available in SPM. However Server WWN

50:01:43:80:02:A3:00:50 (VCEM, IN_USE) LUN 1 is

presented to storage volume "\Virtual

Disks\SPM\Volume8" in storage array "" and assigned

to VC Profile TC8phy-net01_13cd8ff7a90.

RESOLUTION: Delete storage volume "\Virtual Disks\SPM\Volume8" in

storage array "" from the SPM catalog. This is

necessary to avoid the storage volume from being

reassigned to another resource. This can occur if, as

a post-backup activity the storage volume was added

to a newly created SPE and the SPE was associated to

a logical server. [ID001]

Checking \Virtual Disks\SPM\Volume3...................................[OK]

Checking \Virtual Disks\SPM\Volume5...................................[OK]

Completed analysis of storage volumes that are not allocated to a

catalog-based SPE, but are presented to a WWN address within the range

managed by VCEM.

Analysis summary:

4 checks performed

2 actions needed

2 actions require input

0 errors

Analysis completed successfully. All issues should be resolved before taking

the "HP Storage Provisioning Manager Service" out of recovery mode. The "HP

Storage Provisioning Manager" service may be taken out of recovery mode by

editing the file "C:\Program Files (x86)\HP\Storage Provisioning

Manager\state\ApplicationConfig.xml" and setting the property <RecoveryMode>

to "Disabled".

The lsmanalyzer tool may be re-run at anytime using the following command

line syntax: "C:\Program Files\HP\Virtual Server Environment\bin\lsmAnalyzer"

--catalogSPE.

Completed analysis of storage volumes allocated to catalog-based SPEs.

Analysis completed successfully.